Cannot connect Ethernet Bridge to Ethernet Bridge because both are designated as the root bridge.
From Ciscowiki
| Solution # | K16319068 |
| Title | Cannot connect Ethernet Bridge to Ethernet Bridge because both are designated as the "root" bridge. |
| Core Issue | Both Bridges are in the same role in the radio network. |
| Resolution |
For a connection between two Ethernet Bridges to work, one must be set as a "root" bridge and the other as a "non-root" bridge. Verify that both bridges are not set as root and that both bridges are not set as non-root. For information on how to verify or configure the role of your bridge, refer to the following documentation:
|
| Problem Type | Device cannot associate |
| Products | Bridge |
| What can you ping? | Cannot ping peer |
