About Cisco
MGCP, H.323 and SIP on Same Gateway - Ciscowiki
HelpFeedback

MGCP, H.323 and SIP on Same Gateway

From Ciscowiki

Jump to: navigation, search

MGCP, H.323 and SIP on the same gateway

It is possible to have MGCP and H.323/SIP running on the same gateway at the same time, with some calls using MGCP and other calls using H.323 or SIP. MGCP is enabled per voice-port. Once configured, that port must always be under the control of MGCP. If there was a separate port without MGCP enabled, that port would route the calls using normal dial-peers with h323 or SIP. Calls that do not go through an MGCP-controlled voice-port can be treated as regular incoming CVP calls.


--Shahzad Ali 15:26, 17 October 2008 (EDT)

Retrieved from "http://supportwiki.cisco.com/ViewWiki/index.php/MGCP%2C_H.323_and_SIP_on_Same_Gateway"
Quick Help Videos
  1. 1. Introduction
  2. 2. Navigate
  3. 3. Add Content
  4. 4. Edit Content
  5. 5. Markup Language Basics
  6. 6. Upload Files
  7. 7. Create Links
  8. 8. Advanced Features
Search

 
Personal tools
Navigation
Toolbox
Wiki postings may contain unverified user-created content and change frequently. The content is provided as-is and is not warrantied by Cisco.
© 1992-2008 Cisco Systems, Inc. All rights reserved.
Terms & ConditionsPrivacy StatementCookie PolicyTrademarks of Cisco Systems, Inc.